To use UDF formatted DVD-RAM, DVD-RW,or CD-RW media in other
computers, a UDF reader is included on the User’s Guide and Software CD. To
use the UDF reader, follow this procedure:
1. Insert the User’s Guide and Software CD into the CD or DVD drive of the
computer you want to use the UDF formatted discs with.
2. Click Start.
3. Click Run.
4. Type e:\UDF\language where e is the drive letter of the CD or DVD drive,
and language is your language.
5. Click OK.
6. Double-click SETUP.EXEand follow the on-screen instructions.
Note: The UDF reader is only needed on systems that do not have another
DLA program for CD-RWor DVD-RW installed.
Enabling the DMA setting
This section explains enabling the DMA setting with Windows2000 and
Windows XP.:

For Windows 2000

1. Click Start, move the cursor to Settings, and click Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
7. Select the DMA is available as the Transfer Mode.
8. Click OK.
9. Click Close to close System Properties window.A message displays,
informing you that the system settings have changed.
10. Click OK to restart the system.

For Windows XP

1. Click Start, move the cursor to My Computer, and click on it.
2. Click on View system information under System Tasks.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
Chapter2. Using the Multi-Burner drive 13