IBM B24X manual Power supplies and fans, Part number, Description, Quantity, machine type

Table 10 outlines the components used in Figure 8.

Table 10. The components used in Figure 8

Diagram	Part number/	Description	Quantity
Reference	machine type
	0563-012	IBM Ethernet Switch B24X	1
		IBM Ethernet Switch B16M
		z On B16M, use FC1711 (4-port 10 GbE XFP
	4003-M16	module) and FC2110 (10GBASE-SR XFP).	1
		z On B24X, use 69Y0389 (10GBASE-SR SFP+).
		z Connect over multi-mode fiber.
		Cisco Catalyst 6509-E
		z On 6509, use 8-port 10 GbE Fiber module with
	N/A	X2-10GB-SR (10GBASE-SR X2 module).	1
		z Connect over multi-mode fiber. (Note: The X2
		module has a SC connector, whereas the SFP+
		has a LC connector.)
		IBM Ethernet Switch B48Y (Data Center model)
		z On B48Y, use 81Y1455 (4-port 10 GbE SFP+
		module).
		z Use a single Direct Attach cable (TwinAx) to
	0563-HCF	connect to B24X, available in 1, 3, or 5 meters if	1
		length permits.
		z Otherwise, on B24X use 69Y0389
		(10GBASE-SR SFP+) and connect over
		multi-mode fiber.
		Cisco Catalyst Nexus 4948-10GE
		z On the Catalyst use the 10GBASE-SR X2
	N/A	module.	1
		z On B24X, use 69Y0389 (10GBASE-SR SFP+).
		z Connect over multi-mode fiber

Power supplies and fans

The IBM Ethernet Switch B24X comes with one 300 W AC power supply and supports a second power supply for 1+1 redundancy. The power supplies are hot-swappable, auto-sensing, auto-switching, and load sharing, with a universal input (90 VAC to 264 VAC). The power supply has an IEC-C14 inlet that connects to a C13 power connector. Power cords are not included with the switch and must be provided separately.

The IBM Ethernet Switch B24X also comes with a single fan tray consisting of three variable-speed fans. If one fan within the fan tray fails it does not affect the operation of the other fans in the unit. The fan tray is hot-swappable, increasing device availability and serviceability.

Figure 9. IBM Ethernet Switch B24X rear view (fans and power supply)

IBM Ethernet Switch B24X 18