IBM Bertl manual Output, Finisher, Duplexer, Copyright 2006 MCA Internet, LLC dba BERTL, Apr-06

IBMPanasInfonicprintWORKiO1532 ExpressDP-6530LabCheck®

Paper Handling

Output:

On the output side, the IBM Infoprint 1532 Express supports a high capacity output stacker (1,850-sheets), five-bin mailbox (120-sheets per bin), and an output expander (650-sheets). These additional paper handling options can all be added to the IBM Infoprint 1532 Express without increasing the device footprint, thus offering valuable additional benefits with no increase in space requirements.

Finisher:

The optional StapleSmart Finisher offers stapling, offsetting, and an additional output bin. With the same “floating” tray system as the High Capacity Output Stacker. The StapleSmart Finisher can staple up to 25-sheets per set and can hold up to 40 stapled sets. However, the capacity is limited to a maximum of 750- sheets.

Duplexer:

The optional duplexer for the IBM is found on the rear of the model. We found this to be an inconvenient location, since the duplexer is a common site for paper jams. The duplex also sits outside the main housing, and increases the depth to 28.2“ (716 mm).

The duplexer unit for the Infoprint series is positioned behind the device.

Page 8

Page NumberPage 8

www.BERTL.com	Copyright © 2006 MCA Internet, LLC dba BERTL.	6-Apr-06
	All Rights Reserved. The license under which this document is made available and applicable law prohibit any

tel. (1) 732-761-2311	reproduction or further transmission of any portion of this document. This document may only be viewed
	electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format.
fax. (1) 732-761-2312
	Any reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or
BERTLinfo@BERTL.com
	omissions contained in this document.