2 While pushing down the top of the recorder, set the recorder on the cradle. In this case, make sure that concavity on the rear of the recorder fits convexity of the cradle.
“REMOTE” is displayed on recorder if the USB cable is connected.
Remove the recorder from the cradle
Follow step 1 in “Disconnecting from Your PC” (☞ P.35).
1 Make sure that the recorder's record/play indicator lamp isn't flashing, and remove the recorder from the cradle.
Hold the cradle with your hand, and raise the recorder from the top end to remove it from the hook, as shown in the illustration.
.................................................................................................................................................................
Notes
•Do not touch the connection point on the front of the cradle (at the low end), as that may cause bad connection.
•The cradle does not have the recharging function.
3
Connecting to
Your PC
37
