67 5

67 5

5 Press the FF or REW button to select the bass effect level.

The levels switch in the following rotation, “OFF” “LOW” “MIDDLE” “HIGH”.

T r u B a s s

6 Press the PLAY button to save your setting.

7 Press the STOP button to close the menu.

If you wish to set other menus, press and hold the PLAY button for more than 1 second without pressing the STOP button.

If you want to change the WOW level while listening to sound, press the MENU button for at least 1 second during playback and then start procedure from step 3.

.......................................................................................................

Notes

Both the surround effect and bass effect are OFF as the WOW default settings.

If there is no action taken within 8 seconds during the WOW settings during playback, the recorder will revert to normal play.

WOW ” will be displayed on the screen if the surround effect or the bass effect is set.

The WOW effect will be weakened if the bit rate for any music file is less than 32 kbps.

Depending on the song, the WOW effect will be heightened, and may sound like noise. If this happens, adjust the WOW effect.

4

Increasing the

WOW effect

(WOW EFFECT)

49

Page 49
Image 49
IBM DM-10, DM-20 manual Press the FF or REW button to select the bass effect level