IBM E54 UNPACKING PROCEDURE, REPACKING, SETUP

UNPACKING PROCEDUREREPACKING

Save the original box and all packing material for

future shipping needs.

SETUP

This monitor works with platforms running at

horizontal frequencies between 30 and 69 kHz.

•To connect the tilt/swivel base to the monitor, align

hooks with the sockets on bottom side of the

monitor, and gently push the base towards the front

of the monitor.

•Put monitor on a flat and stable working bench.

•Turn off the monitor and computer before

connecting. Connect the video signal cable to the

video output of your computer

•The 15-pin D-shell signal connector on the signal

cable will connect easily to the video adapter

output on your personal computer. Tighten both

screws on the connector to ensure a firm

connection.

Note

•Do not touch the pins of the video signal cable

connector as this might bend the pins.

•When connecting the video signal cable, check the

alignment of the video input connector. Do not

force the video input connector in the wrong way

or the pins might bend.

ÀÁ

ÂÃ