7. Troubleshooting
95
Wrinkles or creases
Make sure that the paper is loaded properly. See Printing on plain paper, bond
paper or transparencies from Tray 1, 2 or 3 on page 9.
Check the paper type and quality. See About paper on page 5.
Turn over the stack of paper in the tray or try rotating the paper 180° in the input
tray.
Wrinkles or creases
aOpen the back cover.
bPress against the “1” on the blue levers on either side of the printer as shown
below.
cAs the top of the lever rotates backward, lift the bottom portion of the lever from
below until it stops.
dClose the back cover and resend the print job.
Note
When you have finished printing, open the back cover and reset the two blue
levers back to their original position.
Examples of poor print
quality
Recommendation
B DEFGH
abc efghijk

ACD

bcde

134

ABCDEFG

EFGHIJKLMN