IBM LV-671 3.3 <Display Device Setup>

LV-671 User’s Manual System Setup

Display Device Setup 39

3.3 <Display Device Setup>

This chapter shows you how to setup the display device under Windows OS.

Before you using your display device:

1. Check your software

Before you can use the display device properly, please install the VGA driver.

2. Check your hardware

Please setup the display device properly before you boot up the system.

For configure your Display device, please follow the instructions below:

1. Please lunch Display Properties.

You would see two Graphics Controllers. If you connect two display devices, you would be

able to setup each device for color bit and resolution.

This item can let you configure which device would be the primary if you connect two

display devices.

This item can let you extend your Windows Desktop to second display device.

If you click the identify button, the screen will pop up the number sequence of your device.

Contents

Main Page Page Page Packing List Index Page Page Chapter 1 <Introduction> 1.1 <Product Overview> 1.2 <Product Specification> General Specification Page Page LV-671 Users Manual Introduction Component Placement 13 1.3 <Component Placement> LV-671 Users Manual Block Diagram 14 1.4 <Block Diagram> LV-671 Users Manual Hardware Setup Connector Location 15 Chapter 2 <Hardware Setup> 2.1 <Connector Location> 2.2 <Jumper Reference> 2.3 <Connector Reference> 2.3.1 <Internal Connector> 2.3.2 <External I/O connector> 2.4 <System Setup> 2.4.1 <CPU Installation> 2.4.2 <Memory Installation> 2.4.3 <CPU Cooler Installation> 2.5 <CMOS Setup> 2.6 <IDE Interface> 2.7 Compact Flash Interface 2.8 <Display Interface> 2.8.1 <Analog display interface> 2.8.2 <Digital display interface> Page Page Page 2.9 <Audio Interface> Page 2.10 <Ethernet Interface> 2.11 <Power and Fan connector> Page 2.12 <GPIO Interface> 2.13 <Expansive Interface> 2.14 <Switch and Indicator> Page Chapter 3 <System Setup> 3.1 <Watchdog Timer Setting> Page 3.3 <Display Device Setup> Page Page Page Chapter 4 <BIOS Setup> Page Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Page A.2 <Floppy Port> A.3 < USB Interface > A.4 <IrDA Port> A.5 < VGA Port > A.6 < LAN Port > A.7 < Serial Port > Page Appendix B <Flash BIOS> B.1 <Flash Tool> B.2 <Flash BIOS Procedure> Page LV-671 Users Manual System Resource I/O Address Map 53 Appendix C <System Resource> C.1 <I/O Address Map> Address Range Device LV-671 Users Manual System Resource I/O Address Map 54 LV-671 Users Manual System Resource Memory Address Map 55 C.2 <Memory Address Map> Range Device LV-671 Users Manual System Resource System IRQ and DMA Resource 56 C.3 <System IRQ and DMA Resource> C3.1 IRQ IRQ Number Device C3.2 DMA Contact Information Taiwan Commate Computer Inc.