![](/images/new-backgrounds/1249339/24933931x1.webp)
Additional settings (OPTION)
You can lock the controls, change the
1Press the button.
The menu appears on the screen.
2Press the m/M buttons to highlight
OPTION and press the
button.
The OPTION menu appears on the screen.
3Press the m/M buttons to select the desired adjustment item.
Adjust the selected item according to the following instructions.
xLocking the controls (CONTROL LOCK)
You can protect the adjustment data by locking the controls.
Press the m/M buttons to highlight (CONTROL
LOCK) and press the button. Then press the m/M
buttons to select ON and press the button.
Only the ! (power) button, button,
(input) switch,
,
and (CONTROL LOCK) of the
OPTION menu will
operate. If any other items are selected, the mark appears on the screen.
To cancel the control lock
Repeat the procedure above and set (CONTROL LOCK) to OFF.
xChanging the
(LANGUAGE)
See page 7.
xChanging the menu’s position
(OSD POSITION)
Change the menu’s position if it is blocking an image on the screen.
Press the m/M buttons to select (OSD POSITION)
for horizontal adjustment, or (OSD POSITION) for
vertical adjustment and press the button. Then press the </, buttons to shift the
Then press the button.
xSetting the COLOR mode
See page 12.
Resetting the adjustments (RESET)
This monitor has the following 2 reset methods.
xResetting all the adjustment data for the current input signal
1Press the button.
The menu appears on the screen.
2Press the m/M buttons to highlight
0 RESET and press the button.
3Press the m/M buttons to select 01 (CURRENT
MODE) and press the button.
4Press the m/M buttons to select OK.
RESET |
|
1 |
|
2 | CURRENT |
| MODE |
| OK |
| CANCEL |
1 6 0 0 x 1 2 0 0 / 8 5 H z |
Note that the following items are not reset by this method: |
|
• | US |
•color mode setting in the OPTION menu (PRESET, VARIABLE, EXPERT, sRGB) (page 12)
•color temperature setting in the PRESET mode (9300K, 6500K, 5000K) (page 12)
•
xResetting all of the adjustment data for all input signals
Select 02 (ALL MODES) in step 3 above.
Note
The RESET function does not function when (CONTROL LOCK) is set to ON.
14