FLJB_WDD_BASE_ESDS_RBA
4-byte relative byte address of record in base data set for ESDS (0 if file
does not refer to ESDS, or if it is an extended addressing ESDS).
FLJB_WDD_BASE_KEY_LENGTH
2-byte base key length. (The key length is 4 for an RRDS, a VRRDS, or a
standard ESDS; 8 for an extended addressing ESDS.)
FLJB_WDD_PATH_KEY_LENGTH
2-byte path key length (0 if file does not refer to a path).
FLJB_WDD_BITS
1-byte flag field:
X’80’ UOW has been shunted at least once
X’40’ Fixed-length record
Reserved
3-byte reserved field.
File-close record types
There are two sections in the journal records written for file-close record types:
vThe FLJB_GENERAL_DATAsection
vThe FLJB_CLOSE_DATAsection.
The format of such a record written for file-close record types is shown in Figure 83
on page 723.
242
FLJB_WDD_BITS
Pathkeylength
(0iffile does not refer to a path)
FLJB_WDD_PATH_KEY_LENGTH
Basekeylength
FLJB_WDD_BASE_KEY_LENGTH
FLJB_WDD_BASE_ESDS_RBA
Relativebyteaddress of
recordinbase data set for ESDS
(0iffile does not refer to ESDS or
isextendedESDS)
Flagbyte
X'80'UOWhas been shunted at least once
X'40'fixedlength record
13
Fixedlength
Reserved
Figure82. Format of the FLJB_WRITE_DELETE_DATA section
722 Customization Guide