IBM x3400 Drive Bays, Disk/Tape Controllers, Internal Backup, High-PerformanceAdapter Slots

Models: x3400

1 15
Download 15 pages 42.55 Kb
Page 5
Image 5
Drive Bays

An affordable dual-socket, dual- and quad-core SMP server with high performance and data protection for small and medium businesses

and installing the drives.) Hot-swap SAS drives use the Converged Tray for interchangeability with other IBM System xsystems.

If you need more storage space, terabyte capacities are possible with external direct-attach, NAS and

SAN solutions.

Drive Bays

All x3400 models contain 7 drive bays standard. Hot-swapmodels are upgradeable to 11. All models offer three 5.25-inchbays and four 3.5-inchHDD bays. Some models support up to four hot-swap SAS or SATA drives; other models support up to four simple-swap SATA drives. The optional upgrade kit adds a drive cage containing four more hot-swapbays. This enables the installation of up to eight slimline (1.0") SAS or SATA drives.

An internal full-hightape drive can be installed using both available 5.25-inch drive bays; alternatively, an internal half-hightape drive can be installed using one of the 5.25-inch drive bays. The tape drive must have a USB 2.0 interface. A 16X 4 speed half high CD-ROM drive with a SATA interface ships standard in the other 5.25-inch bay. No diskette drive is supplied with any model; an external USB floppy drive may be used, if needed.

Hot-swap and simple-swap drives may be inserted or removed through the front of the server. Hot-swapdrives do not require powering off the system. Simple-swapSATA drives do require powering off the system first; however, no tools or jumpers are required for installation and removal, allowing for faster, simpler servicing than fixed drives.

For still more storage, a direct-attach, NAS or SAN external expansion option can be added, using an optional controller.

Disk/Tape Controllers

Some x3400 models include an integrated eight-port Adaptec AIC9580W Serial-Attach SCSI (SAS) controller. Other x3400 models include a SATA controller, integrated in the Intel chipset.

The integrated SAS controller supports up to four internal SAS or SATA LVD (low-voltage differential) hot-swapdrives standard , and provides data transfer speeds of up to 300MB per second5 in each direction (full-duplex) across the SAS bus, for an aggregate speed of 600MBps, nearly double that of Ultra320 SCSI’s 320MBps (half-duplex) bandwidth. The serial design of the SAS bus allows maximum performance to be maintained as additional drives are added. This controller also supports up to eight Serial ATA II (SATA II) drives at SATA II throughput (300MBps, half-duplex). The Hot-Swap SAS/SATA 4-Pac HDD Option allows the installation of up to four additional (eight total) hot-swap SAS or SATA drives.

The integrated ServeRAID-8k-lcontroller in the hot-swap models offers hardware RAID-0/1/10support and 32MB of fast PC2-4200 DDR2 cache for SAS or SATA drives. The ServeRAID-8koption adds three additional RAID levels, RAID-1E, 5 and 6, along with 256MB of cache memory for higher performance, and battery backup, without consuming a valuable adapter slot.

The integrated SATA II controller (simple-swap SATA models only) supports up to four internal simple- swap LVD SATA drives. It provides firmware-basedRAID-0/1support standard. The system can be upgraded to hardware-based RAID-0/1/10/1E/5/6for higher performance, using the same IBM ServeRAID-8k SAS/SATA controller as the hot-swap server models.

Other supported RAID controllers include:

ServeRAID-8sSAS/SATA, 8-lanes, 256MB cache (optional battery-backup), x8 PCI-E (4 lanes internal, 4 external; four-port cable for external SAS/SATA RAID storage)

In addition, the Ultra320 SCSI Controller 2 supports the use of an internal SCSI tape drive.

Internal Backup

The x3400 supports several internal tape backup options. Supported technologies include:

DDS-5(half-high)

DDS-6(half-high)

LTO-2 Ultrium (half-high)

LTO-3 Ultrium (full-high)

VXA-3(half-high)

High-Performance Adapter Slots

The x3400 provides two x8 (“by 8”) 4GBps PCI-E (PCI Express) full-length/full-height adapter slots

(Slots 2 and 3). Each is capable of supporting x1/x4/x8 adapters at full speed. Slot 1 is a half-length/full-

height x4 (2GBps) PCI-E slot; Slots 4 and 5 are full-length/full-height (1GBps) 133MHz PCI-X slots,

4Variable read rate. Actual playback speed varies and is often less than the maximum possible.

5 Data transfer rates depend on many factors and are often less than the maximum possible.

5

Please see the Legal Information section for important notices and information.

Page 5
Image 5
IBM x3400 specifications Drive Bays, Disk/Tape Controllers, Internal Backup, High-PerformanceAdapter Slots