An affordable dual-socket, dual- and quad-core SMP server with high performance and data protection for small and medium businesses

height x4 (2GBps) PCIe slot; Slots 4 and 5 are full-length/full-height (1GBps) 133MHz PCIx slots, and Slot 6 is a half-length/full-height 33MHz legacy PCI slot.

PCI-Expressis a high-performance, low-latency, next-generation serial I/O bus that is rapidly replacing the older parallel PCI and PCIx buses. A x8 PCIe adapter offers approximately four times the maximum throughput of a 133MHz PCIx adapter7. (A x1 adapter offers throughput similar to a 66MHz PCIx slot.)

Because the SAS, ServeRAID-8k-l or 8k, Gigabit Ethernet, systems management and video controllers are integrated onto the system board, the six adapter slots are all available, which offers you a wide degree of latitude in expansion options.

Gigabit Ethernet Controller

The x3400 includes one integrated Broadcom 5721 Gigabit Ethernet controller for up to 10X higher maximum throughput than a 10/100 Ethernet controller.

It also supports highly secure remote power management using IPMI 2.0, plus Wake on LAN® and PXE (Preboot Execution Environment) flash interface. Optional PCI adapters offering failover and load balancing between adapters are available for added throughput and increased system availability.

Temperature-Controlled Fans

Strategically located fans, combined with efficient airflow paths, provide highly effective system cooling for the x3400, known as Calibrated Vectored Cooling. The base server with one power supply includes three hot-swapfans. Adding the optional power supply for redundant power (selected models) also adds three more hot-swap fans, for redundant cooling. In addition, each power supply contains a fan.

The system contains three cooling zones. Zone 1 (incorporating one fan in a nonredundant configuration or two with redundancy) cools the memory slots and the three 5.25-inch drive bays. Zone 2 (one or two fans) cools the processors, and Zone 3 (one or two fans) cools the adapter slots and the HDD bays.

The fans automatically adjust speeds in response to changing thermal requirements, from a minimum of 1,000 RPMs to a maximum of 4,800 RPMs, depending on the zone, redundancy, and internal temperatures. When the temperature inside the server increases, the fans speed up to maintain the proper ambient temperature. When the temperature returns to a normal operating level, the fans return to their default speed. Why not simply run the fans at 100% capacity all the time? For several good reasons: to reduce the ambient noise, reduce the wear-and-tear on the fans and reduce the server power draw. The reduction in ambient noise and power draw may be relatively minor for a single server, but put dozens or hundreds in a data center and it can make a big difference!

In addition, the server uses hexagonal ventilation holes in the chassis. Hexagonal holes can be grouped more densely than round holes, providing greater airflow through the system cover.

This cooling scheme is important because newer, more powerful processors generate a significant amount of heat, and heat must be controlled for the system to function properly.

Other Features

•Five USB 2.0 ports — Provides flexibility to add high-speed external devices. The USB 2.0 specification supports up to 480Mbps transfer rates. (Note: Not all USB 2.0 devices are capable of achieving this rate.) Two ports are provided on the front of the server, two are on the back, and one is internal to support a USB-interface tape drive.

•Remote Supervisor Adapter II SlimLine support — This optional full-function systems management adapter adds local and remote management functions without consuming an adapter slot.

•Dual video ports — An ATI Radeon ES1000 SVGA video controller provides up to 1024x768 resolution, with a color depth of 32 bits at 75Hz refresh rate. To simplify local systems management, one video port is provided on the front of the unit and one on the back.

•Toolless chassis — The cover can be opened without tools, and many components can be removed and replaced without tools, including the CD-ROM drive, hot-swap HDDs, plus PCI, PCIx and PCIe adapters, as well as the integrated ServeRAID-8k and Remote Supervisor Adapter II SlimLine. This can save a servicer significant time.

Rack Cable Management and KVM Console Switching

IBM Advanced Cabling Technology (ACT) is an optional feature that offers many advantages over standard KVM cabling across the entire System x and xSeries product line. So now you can interconnect all of your servers with one smart cabling architecture. ACT cabling eliminates the need for one-to-one direct connections between each server and a KVM switch by using a daisy-chain approach.

The snarl of cabling behind most racks is at best inconvenient to work around and at worst an expensive logistical nightmare, requiring the rewiring of servers, PDUs, KVM switches, and other equipment whenever a rack server is added or removed. Even worse, the veil of cables blocks rack airflow and can

7Actual throughput will depend on the adapter vendor’s implementation.

Please see the Legal Information section for important notices and information.

6

Page 5 Page 7
Page 6
Image 6
IBM x3400 specifications Gigabit Ethernet Controller, Temperature-Controlled Fans, Other Features
Page 5 Page 7

x3400 specifications

The IBM x3400 is a versatile and robust server that is part of IBM's System x family, designed specifically for small to medium-sized businesses (SMBs) and enterprise branch offices. Known for its reliability and performance, the x3400 series is an excellent choice for organizations looking to improve their IT infrastructure.

One of the primary features of the IBM x3400 is its dual-socket architecture, which allows for the installation of two processors. This server supports Intel Xeon processors, offering outstanding computing power and excellent scalability. The x3400 is designed to handle demanding workloads, making it suitable for virtualization, database management, and medium-sized enterprise applications. It supports up to 128 GB of DDR3 memory, ensuring that applications run smoothly even under heavy loads.

In terms of storage options, the IBM x3400 boasts impressive flexibility. It can accommodate a variety of hard drive configurations, featuring support for up to eight 3.5-inch hot-swap SAS, SATA, or SSD drives. This flexibility allows businesses to tailor their storage solutions to meet specific needs, whether that be speed, reliability, or capacity. Additionally, the x3400 includes the Integrated RAID capabilities that offer improved data protection and performance.

The server also emphasizes enhanced manageability features. With IBM's Systems Director, users can monitor system health, track asset information, and automate specific tasks to reduce administrative overhead. This built-in management software simplifies server administration and helps IT staff to optimize system performance.

Networking is another key aspect of the IBM x3400. The server comes with multiple integrated Gigabit Ethernet ports, ensuring that it can handle high-traffic loads efficiently. Furthermore, the x3400 supports optional IBM Virtual Fabric technology, which enhances network performance by allowing the consolidation of multiple network connections into a single interface.

Security is a critical factor in today’s IT environment, and the x3400 is designed to address this concern. It includes features such as the IBM Trusted Platform Assurance, which offers hardware-based security, ensuring that the server can protect sensitive data from potential threats.

In conclusion, the IBM x3400 stands out as a reliable, high-performance server solution tailored for growing businesses. Its blend of processing power, storage flexibility, integrated management tools, networking options, and security features makes it an ideal choice for organizations aiming to enhance their IT capabilities while ensuring ease of use and maintenance.
Top Page Image Contents