IBM Partner Pavilion 8122 v If it is the first CD drive or DVD drive, set it as a master device

Models: 8123 8122 8124 8131 8137 8138

1 64
Download 64 pages 57.64 Kb
Page 34
Image 34
vIf it is the first CD drive or DVD drive, set it as a master device.

5.If you are installing any type of drive other than a serial ATA hard disk drive, make sure the drive that you are installing is set correctly as either a master or a slave device.

Note: A serial ATA hard disk drive does not need to be set as either a master or a slave device.

vIf it is the first CD drive or DVD drive, set it as a master device.

vIf it is an additional CD drive or DVD drive, set it as a slave device.

vIf it is an additional parallel ATA hard disk drive, set it as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

6.For the 5.25-inch drive, install a retainer bracket on the side of the drive.

7.For the 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to 3.5-inch.

8.Install the drive into the bay until it snaps into position.

18User Guide

Page 34
Image 34
IBM Partner Pavilion 8122, 8138, 8137, 8131, 8124, 8123 v If it is the first CD drive or DVD drive, set it as a master device