2 CHAPTER CONTINUED
DSELECTING RF OUTPUT POWER
The transceiver has 3 output power levels to suit your operating re- quirements. Low out put power settings during
qWhile pushing and holding [PTT], [MONI], turn [OFF/VOL] to power ON.
wPush [MONI] to toggle between Low1 (1 W ; Pi), Low2 (2 W ; PiPi) and High (4 W ; PiPiPi).
eTurn the power OFF, and then ON again.
DSETTING THE SIMPLEX/DUPLEX OPERATION
The Simplex/Duplex function changes duplex channels to simplex channels.
qWhile pushing and holding [PTT], [MONI], turn [OFF/VOL] to
power ON.
wTurn CH selector knob to select the desired channel. e Push [W/N] to turn the simplex mode ON.
•A beep (Pi) is emitted.
or
ePush and hold [W/N] to turn the duplex mode ON.
•A long beep (Pii) is emitted.
rTurn the power OFF, and then ON again.
NOTE: Duplex mode is available between CH 1 to CH 8. (see right.)
13
