Icom IC-F14/S, IC-F24/S 3

CONVENTIONALOPERATION

3CONVENTIONAL OPERATION

➥Rotate [VOL]to turn power ON.

IC-F14S/F24S:

Toggle [CHANNELSWITCH] to select

the channel 1 or 2, or, push one of [MR-

CH 1]to [MR-CH 4] key to select a chan-

nel directly.

• The memory channels 3 and 4 are avail-

able when [MR-CH 3] and [MR-CH 4]

keys are assigned.

IC-F14/F24:

Rotate [CHANNEL SELECTOR] to se-

lect the desired operating channel, in se-

quence; or, push one of [MR-CH 1] to

[MR-CH 4] key to select a channel di-

rectly.

AUTOMATIC SCAN TYPE:

Channel setting is not necessary for this type. When turning the

power ON, the transceiver automatically starts scanning. Scanning

stops when receiving a call.

[VOL]

[CHANNEL

SELECTOR]

[CHANNEL SWITCH]

When your system employs tone signalling (excluding CTCSS and

DTCS), the call procedure may be necessary prior to voice trans-

mission. The tone signalling employed may be a selective calling

system which allows you to call speciﬁc station(s) only and prevent

unwanted stations from contacting you.

qSelect the desired TX code channel or 2/5-tone code according

to your System Operator’s instructions.

• This may not be necessary depending on programming.

wPush the call key (assigned to one of the dealer programmable

keys.) (p. 11)

eAfter transmitting a 2/5-tone code, the remainder of your com-

munication can be carried out in the normal fashion.

Selective calling Non-selective calling

IC-F14_F24-2.qxd 04.7.22 0:57 PM Page 12 (1,1)