27
4
CONNECTION AND MAINTENANCE
4
■Mounting the transceiver
The universal mounting bracket supplied with your transceiv-
er allows overhead mounting.
•Mount the transceiver securely with the 4 supplied screws
to a thick surface which can support more than 1.5 kg.
■Optional UT-111 installation
Install the optional UT-111 unitas follows:
qTurn the power OFF, then disconnect the DC power cable.
wUnscrew the 4 cover screws, then remove the bottom
cover.
eCut the pattern on the PCB at the CP57, then solder CP58
as shown below.
rInstall the unit as shown in the diagram below.
tReplace the bottom cover and screws, then re-connect the
DC power cable.

e

r

CP57 CP58
Flat washer
Spring washer
When using
self-tapping screws
See p. 28 when unin-
stalling the unit.