3
1
PANELDESCRIPTION
1
yBELLINDICATOR
Appears/blinks when the specific 5-tone/BIIS code is
received, according to the pre-programming.
uCALLCODE MEMORY INDICATOR
Appears when the call code memory is selected.
iSDM MEMORYINDICATOR
Appears when the SDM memory is displayed.
oSDM INDICATOR
Appears when an SDM is received, or a transmit SDM is
selected.
!0ALPHANUMERIC DISPLAY
Displays an operating channel number, channel name, Set
mode contents, DTMF code, etc.
The indication mode can be selected from 1 line or 2 lines.
Ask your dealer for details.
In this instruction manual, the LCD illustration is described
using the 2 lines indication mode.
!1ACTIVATED KEYINDICATOR
Appears above the key assigned as [DIGITAL] key when
that key has been activated.
■Programmable function keys
The following functions can be assigned to [DIAL]*, [UP],
[DOWN], [P0], [P1], [P2], [P3]and [P4] programmable func-
tion keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
*The functions you can assign to [DIAL] are limited.
(Only functions marked with ✩can be assigned.)
✩CH UPAND DOWN KEYS
➥Push (or Rotate)* to select an operating channel.
➥Push (or Rotate)* to select a transmit code channel after
pushing [TX Code CH Select].
➥Push (or Rotate)* to select a DTMF channel after pushing
[DTMF Autodial].
➥Push (or Rotate)* to select a scan group after pushing and
holding [Scan AStart/Stop]/[Scan B Start/Stop].
➥Push (or Rotate)* to select a BIIS code, status number or
SDM after pushing [Digital].
*Rotate when this function is assigned to [DIAL].
✩ZONE UPAND DOWN KEY (This function is for [DIAL] only)
Rotate to select the desired zone.