Icom IC-F60V, IF60V

2PANELDESCRIPTION

MONITOR KEY

➥Mute and release the CTCSS (DTCS) or 2-tone squelch mute.

Open any squelch/deactivate any mute while pushing and hold-

ing this key.(LMR operation only)

➥Activates one of (or two of) the following functions on each chan-

nel independently:(PMR operation only)

• Push and hold to un-mute the channel (audio is emitted; ‘Audible’

condition).

• Push to mute the channel (sets to ‘Inaudible’only).

• Push after the communication is finished to send a ‘reset code’.

(BIIS operation only)

NOTE:The un-mute condition (‘Audible’condition) may auto-

matically return to the mute condition (‘Inaudible‘ condition)

after a speciﬁed period.

LIGHT KEY

Push to turn the backlight ON for about 5 sec. even if the backlight

function is turned OFF in user set mode.

LONE WORKER KEY

Push to turn the Lone Worker function ON or OFF.

• If the Lone Worker function is activated, the Emergency function is au-

tomatically turned ON after the speciﬁed time period has passed with

no operation is performed.

HIGH/LOW KEY

Push to select the transmit output power temporarily or perma-

nently, depending on the pre-setting.

•Ask your dealer for the output power level for each selection.

C.TONE CHANNELENTER KEY

Push to enter the continuous tone channel selection mode, and push

[CH Up]/[CH Down] to change the tone frequency/code setting. The

selected channel remains set as the continuous tone channel until

another channel is designated as such.

! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 10 (1,1)