16
3BASIC OPERATION
■Receiving and transmitting
NOTE:Transmitting without an antenna may damage the trans-
ceiver. See p.2 for antenna attachment.

Receiving:

qRotate [VOL] to turn power ON.
wPush[CH Up] or [CH Down] to select a channel.
eWhen receiving a call, adjust the audio output level to a comfort-
able listening level.

Transmitting:

Wait for the channel to become clear to avoid interference.
qWhile pushing and holding [PTT], speak into the microphone at a
normal voice level.
• When a tone signalling system is used, the call procedure de-
scribed at the previous page may be necessary.
wRelease [PTT] to return to receive.
IMPORTANT:To maximize the readability of your signal;
1. Pause briefly after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak into the microphone at a normal voice
level.
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 16 (1,1)