41
8
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
VOX gain and delay adjustment
qAttach the connector of the VS-1SC into the [SP/MIC] connector
on the transceiver and tighten the screw.
• Toggle the toggle switch to [VOX].
wEnter user set mode. (pgs. 13, 20)
ePush [P0] several times to select “VOX Gain” or “VOX Delay.”
Then, push [ ] or [ ]to set the desired level/condition.
rRotate [VOL] to turn the power OFF to exit set mode.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF, or 1 through 6
for greater sensitivity.
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (in 0.5 sec.
steps) to set the interval before returning to receive.
NOTE: MIC/VOX gain can be adjusted by the adjusting pot
using a thin screw driver.
VOX delay timer is 0.5 sec. (default)
VOX gain level is 3 (default)
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 41 (1,1)