Icom IC-M72 DLCD contrast selection , DAuto power save function , DSelf check function

20
7SET MODE
New2001
DLCD contrast selection “”
The contrast of the LCD can be selected from Hi (default) and
Lo.
DAuto power save function “”
The auto power save function reduces current drain by deac-
tivating the receiver circuit for preset intervals.
• ON : The power save function is turned ON. The power save func-
tion will activate when no signal is received, and no operation
is performed for 5 sec.
• OFF: The power save function is turned OFF.
DSelf check function “”
The self check function informs you in case a problem is
found with the radio. Self check automatically and quickly
runs through its diagnostic steps each time the radio is turned
ON. Afterwards, the radio switches to normal operation mode.
• Temperature : Outside of –35°C to +73°C; –31°F to +163°F
(approx.)
• Connected battery voltage
•Water intrusion
When any of the bellow error messages appear, see the trou-
bleshooting section of this document for advice. (p.30)
Battery voltage error Temperature error Water intrusion
Push
Self check OFF
(default)
Self check ON
Push
Power save ON
(default)
Power save OFF
Push
High contrast (default) Low contrast
IC-M72_1.qxd 06.1.11 18:19 Page 20 (1,1)