32
SPECIFICATIONSNew2001New2001
13
DDGENERAL
• Frequency coverage : TX 156.025–157.425 MHz
RX 156.050–163.275 MHz
• Mode : 16K0G3E
• Power supply requirement : Specified Icom’s battery pack only
• Current drain (at 7.5V DC; approx.):
TX High (at 6 W) 1.7 A
TX Mid. (at 3 W) 1.3 A
TX Low (at 1 W) 0.7 A
RX Max. audio 400 mA(internal speaker)
200mA (external speaker)
• Useable temperature range : –20°C to +60°C; –4°F to +140°F
• Frequency error : ±10 ppm
• Antenna connector : SMA(50 Ωnominal)
• Dimensions : 52.5(W) ×125(H) ×30(D) mm
(Projections not included) 21⁄16(W) ×429⁄32(H) ×13⁄16(D) inch
• Weight (with BP-245) : Approx. 280 g (9.9 oz)
DDTRANSMITTER
• Output power (at 7.5 V DC) : 6 W* (High), 3 W (Middle)
and 1W (Low) *5W for some versions
• Modulation system : Variable reactance frequency mod-
ulation
• Max. frequency deviation : ±5 kHz
• Adjacent channel power : 70 dB
• Spurious emissions : –68 dBc typical
DDRECEIVER
• Receive system : Double-conversion superhetero-
dyne
• Sensitivity (12 dB SINAD) : 0.22 µV typical
• Squelch sensitivity : 0.35 µV typical (at threshold)
• Intermodulation rejection ratio: 70 dB typical
• Spurious response rejection ratio:
70 dB typical
• Adjacent channel selectivity : 70 dB typical
• Audio output power :
Internal speaker 0.6 W typical at 10% distortion with an
8 Ωload
External speaker 0.35 W typical at 10% distortion with an
8 Ωload
All stated specifications are subject to change without notice or
obligation.
IC-M72_1.qxd 06.1.11 18:20 Page 32 (1,1)