5
SPECIFICATIONS
16

General

Frequency coverage: 01.80001.999 MHz
03.50013.999 MHz
07.00017.300 MHz
10.10010.150 MHz
14.00014.350 MHz
18.06818.168 MHz
21.00021.450 MHz
24.89024.990 MHz*1
28.00029.700 MHz*1
50.00054.000 MHz
*1The U.S.A. version can only be
used the antenna tuner on the
2428 MHz bands.
Antenna connector :
Input PL-239×2 (50 )
Output PL-239×4 (50 )
Usable temperature : 10°C to 40°C (14°F to 104°F)
range
Power supply requirement:
non-Europe versions
100120 V AC or
200240 V AC (±10 %)
Europe version 230 V AC (±10 %)
Dimensions (W ×H ×D):
Linear amplier 350 × 265 ×375 mm
132532 ×10 716 ×1434in
Remote controller 205 × 71 ×68.3 mm
8116 ×22532 ×21116 in
(Projections not included)
Weight : 25 kg (55 lb)
(incl. remote controller)
CI-V connector : 2-conductor 3.5(d) mm (18")

Transmitter

Output power :
Driving power : 100 W max.
Spurious emissions : 60 dB (HF bands)
70 dB (50 MHz band)
SEND connector : Phono (RCA)
ALC connector : Phono (RCA)

Antenna tuner

Matching impedance range:
HF bands*216.7 to 150 unbalanced
(Less than VSWR 3:1)
50 MHz band 20 to 125 unbalanced
(Less than VSWR 2.5:1)
*2The U.S.A. version can only be tuned within 1.801.95
MHz of the 1.8 MHz band.
Minimum operating : 60 W
input power
Tuning accuracy : VSWR 1.5:1 or less
Insertion loss : Less than 1.0 dB
(after tuning)
MODE INPUT AC VOLTA GE
200240 V AC 100120 V AC
CW, RTTY 1 kW 500 W
SSB 1 kW PEP 500 W PEP

DECLARATION

OF CONFORMITY

Icom Inc. Japan
6-9-16, Kamihigashi, Hirano-ku
Osaka 547-0002, Japan
Kind of equipment: HF+50 MHz 1 KW LINEAR AMPLIFIER
Type-designation: IC-PW1 + opC-853
Signature
Authorized representative name
Place and date of issue
T. Aoki
General Manager
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Düsseldorf 14D. Dec. 1998
Icom (Europe) GmbH
These equipments comply with the European harmonised standard
ETS300 684 (EMC product standard for Commercially Available
Amateur Radio Equipment).
These equipments also comply with the requirements of the 73/23/EEC
directive for electrical safety. This compliance is based upon the
harmonised CENELEC generic standard EN60 065: 1993 +A11.
(Report No.: E 9861504 E 01 and E 9860764 E 01 by TÜV Rheinland
Germany)
Versions of the IC-PW1 which dis-
play CE on the serial number seal,
comply with the essential require-
ments of the 89/336/EEC directive
for Electromagnetic Compatibility.
NOTE:To meet European EMC regulations,
the OPC-853 AC cable with EMC lter must be
connected to the IC-PW1 Europe version.