System interconnections

1 or 2 Icom 100 W HF transceivers can be connected

as exciters to the IC-PW1.Non-Icom transceivers can

be used, however, band selection will not be synchro-

nized for each exciter.

See the following diagrams for making connections be-

tween the IC-PW1 and an exciter (transceiver).See p.

5 for AC power cable connection.

7
2INSTALLATION AND CONNECTIONS

Using a 13-pin ACC socket (IC-706 series)

IC-PW1 Ground
Coaxial cable
(supplied)
ACC cable (supplied)
Remote control cable (supplied)
To an
antenna
ANT
ACC-1
ANT1 REMOTE
REMOTE
INPUT1
GND
GND

IC-706 series

ACC (13 pins)
OPC-599 (optional)
EXCITER
1 1&2
AC outlet
(Non-Europe versions: 100120/220240 V
Europe version : 230 V)

Using 1 Icom exciter (transceiver)

ANT
ACC-1
ANT2 ANT1 ACC(2) REMOTE
REMOTE
INPUT1
INPUT2 Connect
[INPUT2]
if necessary.
GND
GND

IC-PW1 IC-756

Ground
AC outlet
(Non-Europe versions: 100120/220240 V
Europe version : 230 V)
Coaxial cable (supplied)
Coaxial cable
(optional)
ACC cable (supplied)
Be sure to connect the cable
to the 7-pin ACC(2) jack.
Remote control cable (supplied)
To an
antenna
EXCITER
1 1&2