Icom IF5061, IF5063, IF6061, IF6063 STATUS 01 TX Status 01, TGID01

12
2
BASIC OPERATION
2
DTalkgroup ID code selection
(Digital mode operation only)
If the transceiver has [Talkgroup] assigned to it, the indication
can be toggled between the operating channel name (and the
channel number)* and the Talkgroup ID name (or ID code if
the ID name is not programmed.) When the Talkgroup ID
name (or ID code) is displayed, [CH Up] or [CH Down] selects
the desired Talkgroup ID name (or ID code).
qPush [Talkgroup]— Talkgroup ID name (or ID code)
appears.
wPush [CH Up] or [CH Down] to select the desired
Talkgroup ID name (or ID code).
ePush [PTT] to transmit the selected Talkgroup ID.
DTX Status message selection
(Digital mode operation only)
If the transceiver has [TX Status] assigned to it, the indication
can be toggled between the operating channel name (and the
channel number)* and the Status message (and the Status
channel.)* When the Status message (and the Status chan-
nel)* is displayed, [CH Up] or [CH Down] selects the desired
Status message.
qPush [TX Status]— Status message (and Status channel)*
appears.
wPush [CH Up] or [CH Down] to select the desired Status
message.
ePush [PTT] to transmit the selected Status message.
* Only when the 2 lines indication mode is selected.
STATUS 01
TX Status 01
When the 2 lines indication mode is selected.
Status messageStatus channel
TGID01
When the 2 lines indication mode is selected
and [Talkgroup] is assigned to [P0].
Talkgroup ID name
Appears above the
key that [Talkgroup]
is assinged after
pushed.
IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 12 (1,1)