1
1PANEL DESCRIPTION
Icom Inc.
qe
y
SpeakerFunction display (p. 2)
w r
t
■Front panel
qAF VOLUME CONTROL KNOB [VOL]
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
wLED INDICATOR
➥Lights red while transmitting a signal.
➥Lights green while receiving a signal.
eUP/DOWN KEYS [CH Up]/[CH Down]
Push to select an operating channel, etc.
*The desired function can be assigned by your dealer. (p. 3)
rPOWER SWITCH [ ]
Push to turn the power ON and OFF.
• Automatic scan start, Password prompt and Set mode access
are available at power ON.
tDEALER-PROGRAMMABLE KEYS
Desired functions can be programmed independently by
your dealer. (p. 3)
yMICROPHONE CONNECTOR
Connect the supplied or optional microphone.
NEVER connect non-specified microphones. The pin
assignments may be different and the transceiver may
be damaged.
DDMICROPHONE
The supplied microphone has a PTTswitch and a hanger hook.
• The following functions are available when the microphone is on or
off hook (depending on the setting):
-Automatic scan start when on hook.
-Scan is cancelled when off hook.
-Scan is paused when off hook.
-Automatic priority channel selection is available when off hook.
-Sets to ‘Inaudible’ condition (mute condition) when on hook.
-Sets to ‘Audible’ condition (unmute condition) when off hook.
IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 1 (1,1)