3 OPERATION
■Receiving and transmitting
D Repeater operation
Ask your dealer for details of the repeater’s program- ming.
➥When the power is turned ON, the [PWR] indicator lights green. (p. 1)
➥The [TX] and [BUSY] indicators light simultane- ously while transmitting/receiving a signal.
•The [TX] indicator lights red.
•The [BUSY] indicator lights green.
D Base station operation
Receiving
q Push [POWER] to turn the power ON. w Set the audio and squelch levels.
➥Rotate [SELECT]*1 fully counterclockwise in ad- vance.
➥Rotate [VOLUME] to adjust the audio output level.
➥Rotate [SELECT]*1 clockwise until the noise disappears.
e Push [CH Up]*2 or [CH Down]*2 to select the desired channel.
•When receiving a signal, the [BUSY] indicator lights green and audio is emitted from the speaker.
•Further adjustment of [VOLUME] to a comfortable lis- tening level may be necessary at this point.
*1 When the [SQL Level Up/Down] key function is assigned to [SELECT].
*2 When the [CH Up]/[CH Down] key functions are as- signed.
Transmitting
q Take the microphone off hook.
w Wait for the channel to become clear.
e Push and hold [PTT] to transmit, then speak into the microphone at your normal voice level.
r Release [PTT] to receive.
IMPORTANT:
To maximize the audio quality of the transmitted sig- nal:
(1)Pause briefly after pushing [PTT].
(2)Hold the microphone 1 to 2 inch (2.5 to 5 cm) from your mouth, then speak into the microphone at a normal voice level.