1 PANEL DESCRIPTION

■Front panel

 

 

 

r

 

Function

 

t

 

 

y

q

w display

e

 

P0 P1 P2 P3 P4

q INTERNAL SPEAKER Monitors received signals.w VOLUME CONTROL [VOLUME] (p. 7) Adjusts the audio output level.e SELECTOR DIAL [SELECT]

Rotate to adjust the squelch threshold level, select the operating channel. (Depending on the preprogrammed condition.)

r POWER INDICATOR [POWER]

➥Lights green at ‘A’ module's indicator while the repeater power is turned ON.

When a channel extension module is installed:

➥Lights green at the selected module indicator (‘A’ or ‘B’) while the repeater power is turned ON.

➥Lights orange at the un-selected module indica- tor (‘A’ or ‘B’) while the repeater power is turned ON.

t TRANSMIT INDICATOR [TX] Lights red while transmitting.y BUSY INDICATOR [BUSY]

Lights green while receiving a signal or when the noise squelch is open.

About [PWR], [TX] and [BUSY] indicators:

‘A’ and ‘B’ modules indicators are available for these indications. ‘A’ module's indicator correspond to the original module, and ‘B’ module's indicator correspond to an extended module.

o

i u

u MICROPHONE CONNECTOR [MIC]

This 8-pin modular jack accepts the optional micro- phone.

KEEP the [MIC] connector cover attached to the repeater when the optional microphone is not used.

 

 

 

 

 

 

 

 

 

 

 

q +8 V DC output (Max. 15 mA)

 

 

 

 

 

 

 

 

 

 

 

w Output port for PC programming

 

 

 

 

 

 

 

 

 

 

 

 

i

 

 

q

e NC

 

 

 

 

 

 

 

 

 

 

 

r M PTT (Input port for TX control)

 

 

 

 

 

 

 

 

 

 

 

t Microphone ground

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

y Microphone input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

u Ground

 

 

 

 

 

 

 

 

 

 

 

i Input port for PC programming

 

 

 

 

 

 

 

 

 

 

 

 

i POWER SWITCH [POWER]

➥Push to turn the repeater power ON.

➥Push and hold for 3 sec. to turn the repeater power OFF.

When a channel extension module is installed:

➥While the repeater power is turned ON, push to select the desired module to operate the re- peater as the base station.

•The power indicator of the selected module unit lights green.

o DEALER-PROGRAMMABLE KEYS

Desired functions can be programmed independently by your dealer.

Ask your dealer for details.

•Because these keys are programmable, the functions of these keys are unique to each unit.

1