15
3OPERATION
tPush [DOWN] to turn the position memory function
for the [INPUT] select switch ON.
•The band indicators, [1.8]–[50], light continuously.
yRotate the 1st exciter’s dial until the LED [INPUT
z] lights continuously.
uTurn the 2nd exciter’s power ON.
iPush [INPUT].
•LED [INPUT x] blinks.
oRotate the 2nd exciter’s dial until the LED [INPUT
x] lights continuously.
!0 Turn both exciter’s power OFF to complete the
setting.
ïïWhen using one (1) Icom exciter with two (2)
ANT lines (e.g. IC-756PRO etc.);
qTurn OFF both the IC-PW1/EURO and exciter.
wSet [EXCITER] to [1] position.
eWhile pushing and holding the [INPUT] switch on
the IC-PW1/EURO controller, turn the exciter’s
power ON.
•LED [INPUT z] blinks.
rRotate the exciter’s dial until the LED [INPUT z]
lights continuously.
tPush [INPUT].
•LED [INPUT x] blinks.
yRotate the exciter’s dial until the LED [INPUT x]
lights continuously.
•The band indicators, [1.8]–[50], turn OFF.
•“AUTO” indicator lights continuously.
uTurn the exciter’s power OFF to complete the set-
ting.
ïïWhen using one (1) Icom and one (1) non-
Icom exciter;
qTurn OFF both the IC-PW1/EURO and exciters.
wSet [EXCITER] to [1&2] position.
eWhile pushing and holding the [INPUT] switch on
the IC-PW1/EURO controller, turn the 1st exciter’s
power ON.
•LED [INPUT z] over the [INPUT] switch blinks.
rRotate the exciter’s dial until the LED [INPUT z]
lights continuously.
tTurn the exciter’s power OFF to complete the set-
ting.
ïïWhen using two (2) non-Icom exciters;
➥Set [EXCITER] to [1&2] position, only.
*No other setting is required.
DC power
SEND
RCA plug
ANT
INPUT 1
GND
GND
Relay
DC
powerSEND ALC
GND
RF OUT
SEND 1
ALC 1
ANT
IC-PW1/EURO
DC
SEND
ALC
INPUT
ALC
GND
DC
power
SEND ALC GND
RF OUT
GND
RF OUT
SEND 2
ALC 2
DC power
SEND
Relay
SEND
RCA plug
INPUT 2
EXCITER
1 1&2
Non-Icom exciter
Non-Icom exciter
ANT
ACC(2) REMOTE
REMOTE
INPUT1
GND
GND
ACC cable
EXCITER
1 1&2
IC-PW1/EURO
ANT1 or 2
ANT
GND
SEND ALC GND
RF OUT
ANT
GND
RF OUT
INPUT2
SEND 2
ALC 2
DC power
SEND
SEND
RCA plug
Relay
D
SEND
RC
ANT
ACC-1
ANT2 ANT1
ACC (2) REMOTE
REMOTE
INPUT1
INPUT2
GND
GND
IC-756
ACC cable
EXCITER
1 1&2
IC-PW1/EURO
‘Initial settings for CI-V remote control operation (continued)