Programme Selection
1. COTTONS
To be used for whites and coloureds of cotton or predominantly of cotton in case of mixed load.
STAGE I : Main Wash - Heavy wash/Normal wash/Quick wash
qClothes are soaked, tumbled in water with detergent to remove dirt. Clothes are tumbled to expose more surface, before draining out dirty water.
qIF CLOTHES ARE NOT VERY DIRTY, THE WASH CYCLE CAN BE STARTED BY DIRECTLY SETTING THE PROGRAMME SELECTOR KNOB AT NORMAL OR QUICK WASH, TO REDUCE WASHING TIME.
STAGE II : Rinse
qAfter washing, the rinsing is done automatically four times to remove traces of detergent and dirt from clothes.
qFor most efficient rinsing, two intermittent short spins are provided.
STAGE III : Intensive Spin Drying
qSpin drying takes place at 600 rpm for longer duration.
Drum
Rust Stains
Never leave metal items e.g. paper clips, safety pins etc. in he drum as it creates superficial rust marks in drum. If there are any rust stains remove with a
Sieves
Cleaning of Water connection Sieves, filter
1.Turn off Taps. Disconnect Power supply to the machine. Unscrew inlet hose from machine as well from the tap and drain out water from the hose.
2.Pull the sieve out of the magnetic valve with a pair of flat nosed plier and clean under running water with a brush. Fit Sieve back to the Valve.
3.Remove the filter mesh from the tap end of the inlet hose and clean under running water with a brush.
4.Fit the filter mesh back to inlet hose.
5.Screw inlet hose back to the machine and the tap. Ensure that both the sieves and the filter are in place.
6.Turn on the tap.
Cleaning of Porthole Door Area:
qAfter every wash clean vapour off porthole
door.
qLift the fold in the rubber gasket under porthole periodically to remove lint and dirt preferably after every wash.
14 | 23 |
