9
Top Innovations, Inc.

AUTO SHUT-OFF

The Auto Shut-Off feature of the Fabric Steam Press includes both an Auto Shut-Off
and an Auto Wake-Up. These multiple function safety features deactivate electrical
power to the heater when the Pressing Plate has been left in closed position against
the Ironing Board for more than 10 seconds. Heater
deactivation is signaled by a beeping sound. Heater functionality is restored when
the Pressing Plate is lifted back up.
Power to the heater will also be cut if the Pressing Plate is left in the lifted
position without use for approximately 15 minutes (signaled by a continuous beeping
sound). The heating ability of the unit can be restored either by resetting the On/Off
Switch, or by lowering and then raising the Pressing Plate.
IMPORTANT: Auto Shut-Off does not mean that powerto the unit is totally
cut off. Power is always on, and the PowerIndicator Light will remain
illuminated until On/Off Switch is set to “Off” (O) position (FIGURE1, page 7).

CLEANING THE FABRIC STEAM PRESS

1. Fill Water Reservoir with water using procedure on page 7 of this manual.
2. Place Pressing Cushion in the middle of Ironing Board.
3. Place a clean towel over Pressing Cushion and Ironing Board.
4. Set Temperature Control Dial to the highest setting (LINEN).
5. When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate onto
Pressing Cushion.
6. Press Steam Burst Button six times.
7.Allow Pressing Plate to cool.
8. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may
damage Pressing Plate.
9. Ironing Board fabric cover is removable for cleaning. Hand wash only with mild
detergent.

PROPER STORAGE

1. Once pressing is complete, immediately turn unit off and unplug power cord from
electrical outlet.
2.Allow unit to cool completely (at least 30 minutes).
3. Lower Pressing Plate down, and turn Locking Knob to “Lock” position.
4. Wrap up power cord and place in Cord Storage Compartment.
5. Store all accessories safely away, preferably near Fabric Steam Press.
6. Store Fabric Steam Press in a cool, dry place.
CARE &STORAGE GUIDELINES