FABRIC STEAM PRESS

PRODUCT INFORMATION

The Handle (1) is used to safely lift up and lower the Pressing Plate, and carry the unit.

The Steam Burst Buttons (2) are located on either side of the Handle, and produce a powerful burst of steam when pressed.

The Water Reservoir Cap (3a) covers the Water Reservoir fill hole and must be removed in order to fill the Water Reservoir with distilled water.

The Water Reservoir (3b) is the tank in which distilled water is stored for use by the unit. There must be water in the Water Reservoir in order for the units steam burst function to work correctly.

The Ironing Board (4) is the padded surface onto which fabric is placed during pressing. The fabric cover is removable and can be washed.

The Pressing Plate (5) is the large temperature-controlled surface that heats and presses fabric.

The Pressing Plate Cover (6) is the durable cover that protects the Pressing Plate.

The Temperature Control Dial (7) is used to select a desired temperature, by turning it to the fabric setting that matches the material that you are pressing.

The On/Off Switch (8) activates and deactivates the unit.

The Locking Knob (9) locks the Pressing Plate and Ironing Board together. This allows for carrying and storage of the unit.

The Power Indicator Light (Red) (10) illuminates when the On/Off Switch is set to the “On” position, providing you with a clear visual indication that the unit is powered on.

The Pressing Indicator Light (Green) (11) illuminates while the unit is heating to the selected temperature. When deactivated, this indicates that you are ready to press.

The Steam Burst Ready Indicator Light (Yellow) (12) illuminates once the unit is ready to produce bursts of steam, providing you with a clear visual indication that you can begin using the Steam Burst Buttons.

The Cord Storage Compartment (13) provides a convenient and easily accessible place to store the power cord.

The Measuring Cup (14) is designed to assist you in easily filling the Water Reservoir with distilled water.

The Spray Bottle (15) allows you to moisten fabrics before pressing, which helps to make the pressing process easier and more effective in certain instances.

The Pressing Cushion (16) is a fabric-covered pad used for pressing gathered or contoured areas such as sleeves, darts, or yokes.

6

Top Innovations, Inc.

Page 6
Image 6
Top Innovations SP-660 warranty Fabric Steam Press Product Information