|
|
|
| Display | |||||
| PM indicator | ||||||||
Active App indicator |
|
|
|
|
|
|
|
| Alarm indicator |
|
|
|
|
|
|
|
| Alarm is armed and will sound at set time | |
Appears when an iHome app is active |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bedtime Sleep Timer indicator
Low Backup Battery indicator
Radio mode indicator
Volume indicator | Time Display |
Installing/Replacing the Clock Backup Battery
Note: The CR2032 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings, as well as the radio station preset memory settings in the event of a temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out. The battery backup circuit requires one CR2032 lithium battery, included.
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2032 battery, available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery.
To replace the backup battery:
IMPORTANT: When replacing the backup battery be sure to have the unit connected to | Installing Backup Battery | |
the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the |
| |
time, alarm time, and radio presets after the battery is replaced. |
| |
1. | Locate the battery backup compartment found on the bottom of the unit. |
|
2. | Use a Phillips screwdriver to open the battery compartment cover. Remove the |
|
| cover. |
|
3. | Insert a fresh CR2032 battery in the backup battery compartment with the “+” side |
|
| facing up, as illustrated. |
|
4. | Replace the battery compartment cover and screw the compartment door back in |
|
| place. Do not overtighten. Confirm that the backup battery indicator is not flashing in |
|
| the display. |
|
Note: Make sure you dispose of battery properly (see your local regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws
and regulations for transport and disposal. | 3 |