iHome ID91BZC manual Using the Aux Line-in Jack, Sleep Operation, Using the unit

Using the unit

3.You can set up to 6 presets. To memorize a station as a preset:

A.Press and release the Mode Button to select the FM band.

B.Press and release the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Presets Button until the selected preset number begins flashing in the display.

C.Press and release the + or - Button to tune the radio to a desired station. Press and hold for 2 seconds then release to have the radio autoscan/search for the next clear station.

D.Press and release the Presets Button to confirm the setting. A confirmation beep will confirm the setting and the preset number you wish to assign. Repeat steps A-D to preset up to 6 stations.

4.To listen to a preset station, press and release the Mode Button to select the desired FM band. Then press and release the Presets Button as needed to choose the desired preset.

5.Press and release the or Button to adjust the system volume. If desired, adjust the EQ as described under Listening to iPad/iPhone/iPod.

6.To turn off the radio (and the unit), press and release the Button.

TIP: Download the iHome+Radio app from the App Store to enjoy thousands of internet radio stations from around the globe on your unit.

Using the Aux Line-in Jack

You can play any portable audio device with a standard 3.5 mm headphone jack through the unit via the Aux line-in Jack.

1.Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your device and the other end of the patch cord into the unit Aux-in Jack located on the back of the unit.

2.Press and release the Mode Button until “Aux-in” appears in the lower part of the display.

3.Turn on and play your device.

4.Press and release the or Button to adjust the system volume. You may need to adjust the volume on your external device as well.

5.Press and release the EQ Button as needed to select Treble, Bass, Balance or 3D Sound, then press and release the

+or - Button to adjust settings.

6.To turn off the unit, press and release the Button. Please remember to turn off your device, too.

Sleep Operation

Sleep mode lets you sleep to your iPad/iPhone/Pod or radio, gradually lowering the volume until the unit shuts off at the selected time.

1.Press and release the (bedtime) Button to enter sleep mode. The sleep time will show in the lower display.

2.Press and release the (bedtime) Button again as needed to adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF (power off).

3.When the display changes back to show the real time, press and release the (bedtime) Button once to show the sleep time remaining. Pressing it again will change sleep time to next lowest increment.

4.The unit has an independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the

normal volume. Press and release the or Button to adjust the sleep volume. The sleep volume will remain at that level the next time you enter sleep mode until controls are changed.

5.To stop listening at any time, press and release the Button to turn unit off.

6