iHome instruction manual Playing Audio via Aux, Using the iDM8

Using the iDM8

Playing Audio via Aux

1.Move the Lock/Aux/Bluetooth Switch to the Aux position (center) to listen to audio via aux in.

2.Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device.

3.Power on the audio device and place in play mode.

4.Press and hold the Power Button to turn on the unit (release when green light appears).

5.Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your audio device, too.

6.When done listening, press the Power Button to turn the unit off. Remember to turn off your audio device, too.

6