iHome iH15 manual Playing and Charging your iPod, Color Change Mode, Using the Line-in Jack

Playing and Charging your iPod

1.Place proper insert for your iPod (see insert table on Quick Start Section) in Dock, then gently dock iPod. When docked, iPod will charge until fully charged. The iPod will not overcharge.

2.Press the Button on the iH15 to listen to your iPod. The power on indicator will light up to show the iH15 is on. Make sure your iPod is in play mode.

3.Press the or Button Volume to adjust the volume.

4.To switch off the unit, press the Button again.

Color Change Mode

There are 5 color settings. Press the Color Button to cycle through them. The settings are: slow color change, fixed color,

fast color change, fixed color and light off.

Using the Line-in Jack

1.Plug one end of an audio patch cord (available at ihome.com) into the headphone or line-out jack on your audio device and the other end of the patch cord into the iH15 Line-in Jack located on the back of the unit.

2.Press the Button on the iH15 to play your audio device. The power on indicator will light up to show the iH15 is on. Place your device in play mode.

3.Press the or Button to adjust the volume.

4.To switch off the unit press the Button again. Remember to turn off your audio device, too.

3