Manuals / iHome / Portable Media / Clock Radio

iHome iH36 manual Maintenance, Setting Up

Models: iH36

1 21
Download 21 pages 11.22 Kb
Page 14
Image 14

Maintenance

•Place the unit away from sources of direct sunlight or excessive heat.

•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can mar the surface of the case.

Setting Up

This unit has a Clock which is preset at the factory. It takes just a few steps to match the clock setting to where you live.

1.

Depending on your location and whether or not Daylight Saving Time (DST) is in effect, set the

DST Switch located

 

on the bottom of the unit to +1 or -1 to adjust the time forward or backward one hour.

 

2.

Press and hold the Time Zone Button located on the bottom of the unit for approx. 2 seconds until the Time Zone

 

Indicator at the lower part of the display shows the current time zone and flashes. Press the

Select Up/FF or

 

Select Down/Rew Buttons to select the time zone.

 

3.Press the Time Zone Button again to (or if no key pressed for approx. 10 seconds) exit the setting mode.

4.If the time showing is not correct, please see Setting Time and Calendar to set the clock.

Note: You can adjust the contrast of the display by pressing and holding the Time Zone Button until the zone display flashes, and then pressing the Preset 1 or Preset 2 button to achieve the preferred contrast.

Setting Time and Calendar

1.

Press and hold the Clock Adj Button located on the bottom of the unit for 2 seconds until the year is flashing in the

 

display. Press the button again to accept the current setting or press the

Select Up or Select Down Button until

 

the current year is displayed. Press the Clock Adj Button to confirm year setting after adjustment.

2.

The display will change to show the date flashing. Press the

Clock Adj Button to accept the current setting or press

 

the Select Up or Select Down Button until the current date is displayed. Holding the button for a few seconds

 

will advance or reverse rapidly. Press the Clock Adj Button to confirm date setting after adjustment.

3.

The time on the upper part of display will flash. Press the

Select Up or

Select Down Button until the current time

 

is displayed. Holding the button for a few seconds will advance or reverse rapidly. Remember to set the correct AM or PM.

4.

Press the Clock Adj Button again to (or if no key pressed for approx. 10 seconds) exit the setting mode.

Charging your iPod

Note: Please make sure you are using the correct insert for your iPod (see Install iPod Insert on page 10) and that it is properly docked into the iH36. Failure to do so may damage your iPod.

1.Press the Dock Open/Close Button to open the iPod dock then dock your iPod into it.

2.While your iPod is docked in the system, it recharges (until fully charged).

3.Press the Dock Open/Close Button again to close the dock. The iPod will recharge whether the dock is open or not.

4.For iPod Shuffle, just plug it into the shuffle connector located on the bottom of the unit. The iPod Shuffle will keep charging until fully charged.

13

Page 13 Page 15
Page 14
Image 14
iHome iH36 manual Maintenance, Setting Up
Page 13 Page 15

iH36 specifications

The iHome iH36 is a versatile alarm clock that harmonizes technology with practical design to enhance your daily routine. Packed with features that cater to modern lifestyles, this clock radio stands out in the crowded market of alarm clocks, making it an appealing choice for tech-savvy users.

At the heart of the iHome iH36 is its Bluetooth capability, allowing users to stream music directly from their smartphones or tablets. This feature not only offers wireless convenience but also elevates the overall audio experience. Whether you're waking up to your favorite tunes or unwinding with some relaxing background music, the iH36 delivers a rich sound that suits various listening preferences.

The device also boasts a vibrant and easy-to-read LED display with adjustable brightness levels. This feature ensures that users can customize the brightness to suit their environment, whether it's a dimly lit bedroom or a bright living space. The functional design extends to its dual alarm settings, allowing for two separate wake-up times. This is ideal for couples who may have different schedules, facilitating a personalized approach to waking up.

The iH36 is equipped with a USB charging port, enabling users to charge their devices conveniently overnight. This eliminates the need for multiple chargers on your nightstand, streamlining your space and ensuring your phone is always powered. For those who prefer more traditional wake-up sounds, the iH36 offers a variety of alarm tones, giving users the option to choose what suits them best.

Moreover, the device features a built-in FM radio, expanding its functionality beyond just an alarm clock. Users can enjoy their favorite radio stations, adding another layer of entertainment options. The iH36 also supports a sleep timer function, allowing users to drift off to music or radio, automatically turning off after a set duration.

In terms of design, the iHome iH36 combines practicality with a sleek aesthetic. Its compact footprint makes it suitable for various bedside tables, while its contemporary look fits seamlessly with any decor. Overall, the iHome iH36 is a thoughtfully designed alarm clock radio that incorporates modern technology and functionality, making it an essential addition to any bedroom.