iHome iH36 manual Measure the overhang height, Determine which spacers and screws to use, Examples

iH36 Mounting/Installation Instructions

Step 1. Measure the overhang height

Use a ruler or tape measure to determine the exact amount of overhang, if any. Measure from the front inside bottom edge of the cabinet bottom straight down to the end of the overhang (see figure 1) to determine the height of the overhang.

Step 2. Determine which spacers and screws to use

Once you have your overhang measurement, look at Table 1 and find the nearest measurement in the Overhang column, then determine the combination of spacers and screw size you need. Set them apart.

Front of Cabinet

(Figure 1)

Bottom Shelf

OVERHANG

Measure this distance to select screw and spacer combination (see chart)

Examples:

If your cabinet has no overhang, just use 4 of the 3 inch screws with no spacers

If your cabinet has a 1 inch overhang, use 4 of the 1/2" spacers, 4 of the 1" spacers and four 4 1/2" screws.

Table 1: SPACER/SCREW SELECTION CHART

OVERHANG		SPACERS	SCREW
0 - 3/8’’		None		3’’ x 4
1/2 - 3/4’’		1’’ spacer x 4		3’’ x 4
7/8	- 1 3/8’’	1/2’’ spacer x 4 +	4	1/2’’ x 4
		1’’ spacer x 4
1 1/2	- 1 3/4’’	1’’ spacer x 8	4	1/2’’ x 4
1 7/8	- 2 1/4’’	1/2’’ spacer x 4+	4	1/2’’ x 4
		1’’ spacer x 8

Note: This unit is designed for cabinets with an overhang of 2 1/4" or less. If your cabinet has an overhang longer than 2 1/4", please call a customer service representative at 1-800-228-2792.

8