Installing/Replacing iH80 Batteries
Installing/Replacing Batteries
1. Open the battery compartment cover located on the bottom of the unit.
2. Insert 8 “C” batteries, checking that the + and – ends of the batteries match the drawing inside the battery compartment. We recommend
the use of alkaline batteries for longer life.
3. Close the compartment cover.
Batteries information:
• Do not mix old and new batteries.
• Do not mix alkaline, standard
• Make sure you dispose of batteries properly (see your local regulations).
Installing Batteries
Using The Remote Control
Installing/Replacing the Remote Control Battery
The remote control battery is already installed at the factory. When the remote control stops operating or its range seems reduced,
it is time to replace the battery with a new one.
1.The battery door is located on the back end of the remote.
2.Slide the battery door open and remove old battery.
3.Insert a CR2032 battery, checking that the + and – sides of the battery match the drawing inside the battery compartment.
4.Replace the battery door.
Install Remote Control Battery |
Note: Make sure you dispose of all batteries properly (see your local regulations).
OPERATING THE REMOTE CONTROL
The Remote Control controls basic functions on the iH80 and certain iPod® functions when the iPod® is docked in the iH80. For best results, aim remote control towards the iH80.
4