iP18 Quick Start
1: power | 2: inserts | 3: auto sync | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RESET |
|
|
|
|
|
| RESET |
|
|
|
|
|
|
|
|
|
| |
|
| TEST |
|
|
|
|
|
| TEST |
|
|
| |
Attach AC adaptor cable to adaptor jack on back of the iP18 and plug the other end into a
wall socket to play and charge iPhone/iPod. Remove the tab from the battery backup compartment.
Select the dock insert for your iPhone/iPod model from the table below and place insert in dock. To remove insert, place thumbnail in slot and gently pull upwards.
Insert your iPhone/iPod on to the dock. After a moment the unit will attempt to Auto Sync the clock on the unit to the time on your iPhone or iPod. “SYNC AUTO” will appear on the display, followed by “SYNCED” and 2 beeps. If “FAIL” appears and a long beep sounds, try again with a different iPhone/iPod or set time manually (see page 4).
Use this insert | iPod touch 2G | iPhone 4 | nano 6G/touch 4G |
| insert 16 | insert 19 | insert 20 |
For this | iPod touch 2G/3G | iPhone 4 | nano 6G/ |
iPhone / iPod |
|
| iPod touch 4G |
Note: An insert provides the best stability and safety for your iPhone/iPod, but you can safely dock your iPhone or iPod without an insert, provided you always do so with care. If you prefer to use an insert and don’t have one for your model, please visit www.ihomeaudio.com or call iHome toll free at
4: iPhone/iPod | 5: color change |
Dock a playing iPhone or iPod to turn on the unit. After a moment you will hear your music. Press the 
Button to play a docked iPhone or iPod. Press the 
Button again to pause play. Your iPhone or iPod will charge while docked.
Press and release the Color Button as needed to cycle through color mode settings. In Fast color change mode, press and release the Color Button when a specific color is showing to select that color.
2
