iHome manual Using iP29, Using the Line-in Jack

Using iP29

Using the Line-in Jack

1.Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your audio device and the other end of the patch cord into the iP29 Line-in Jack.

2.Switch the Power On/Off Switch to “ON” and the power on indicator will light up to show iP29 is on. You need to set your device to play too.

3.Press the + or – Button to adjust the volume. You may need to adjust your device’s volume, too.

4.To switch off the unit, slide the Power On/Off Switch to ‘OFF’. Do remember to switch off your device, too.

4