iP99 quick start
1:power 2:antenna 3:inserts
Attach AC adaptor cable to jack on back of the iP99 and plug the other end into a working wall socket.
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com, or call iHome toll free at
|
|
| Select the dock insert for your | ||
Snap AM antenna into provided | iPhone or iPod® model from the | ||||
stand, then plug antenna cable | table below and place insert in | ||||
into socket on back of iP99. | dock. Never dock an | ||||
Move antenna 12” away. | iPhone/iPod without an insert in | ||||
|
|
| place. |
|
|
Use this insert | iPhone | 3rd Gen nano | iPod Touch | iPod Touch |
|
| Insert 12 | Insert 13 | Insert 14 | Insert 15 | |
For this iPod | iPhone | 3rd Gen nano | iPod Touch | 3G iPhone | |
4:time5:iPod/ 
iPhone
6:radio
•Move the DST switch on back of unit to +1 or
•Press & hold the Time Zone button on back until the display flashes
•Turn the Set Wheel to select your time zone
•Press the Time Zone button again.
Insert an iPhone or iPod® into the dock with proper insert (iPhone/iPod must not be in a skin or case). The iPhone/iPod will charge while docked.
Press the Play/Pause Button on the iP99 to play your iPhone/iPod.
Press the Radio button as needed to select AM/FM band. Turn the Set Wheel to tune in a station. See page 5 for programming presets.
2
