iHome IPL10 instruction manual Setting and Using the Alarm, Setting the Alarm

SETTING AND USING THE ALARM

SETTING THE ALARM

This unit lets you wake to your docked iPhone, iPod (iPod), USB-con- nected device (USB), FM radio or to the built-in buzzer alarm. The alarm will sound for 60 minutes or until reset/turned off.

1.Press and hold the Alarm Button until the alarm time display flashes with one beep.

2.Press the + or – Buttons to adjust the display to the desired alarm time (hold for rapid adjustment). Remember to set the correct AM or PM alarm time.

3.Press the Alarm Button to confirm the alarm time. The WAKE-TO indicator will flash on the display. Press the + or – Buttons to toggle among wake to Lightning dock, USB, FM radio or buzzer, then press the Alarm Button to access volume setting for the selected alarm

source.

Wake to iPod: If wake to dock (iPod) is selected, press the + or – Buttons to set the Lightning dock volume (can be set from 5- 40). The alarm will wake you to the last track played on your docked iPhone or iPod.

Wake to USB: If wake to USB is selected, press the + or – Buttons to set the USB dock volume (can be set from 5- 40). The alarm will wake you to the last track played on the iPhone or iPod connected to the USB dock.

Wake to radio: If wake to FM is selected, press the + or – Buttons to select a radio station to wake to, then confirm your selection by pressing the Alarm Button. Press the + or

–Buttons to set the FM radio alarm volume (can be set from 5- 40).

Wake to Buzzer: If wake to Buzzer is selected, press the + or – Buttons to

choose HI or LO buzzer alarm volume.

4.Press the Alarm Button to exit and confirm alarm settings. An alarm icon will appear on the display, indicating that the alarm is set and armed.

6