Iiyama E1908WSV user manual Fitting and Removal of Base, Install

FITTING AND REMOVAL OF BASE

CAUTION „ Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.

„Do not give a strong impact to the monitor. It may cause damage.

„Unplug the monitor before installation to avoid electric shock or damage.

<Install>

1.Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

2.Hold the monitor and push the Stand-Arm. 3.Hold the monitor and push the Stand-Base.

Stand-Arm

<Remove>

1.Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

2.Press the stopper at the bottom of the stand and remove the Stand-Base from the arm.

3.Press the stopper at the back of the stand arm and remove the Stand-Arm from the monitor.

Stopper

Stand-Base

Stopper Stand-Arm

ENGLISH

Stand-Base

BEFORE YOU OPERATE THE MONITOR 5