COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 31: COMPLIANT TIMING.
Windows 95/98/2000/Me/XP/Vista Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied. Windows 95/98/2000/Me/XP/Vista Monitor Information File for iiyama
monitors may be necessary for your computer and obtained via the Internet, using the address: http://www.iiyama.com
NOTE | For additional information on how to download the driver for your monitor, please |
| access one of the internet sites noted above. |
| Monitor Drivers are not required in most cases for Macintosh or Unix operating systems. |
| For further information, please contact your computer dealer first for advice. |
ENGLISH
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full face of the monitor.
Hold the stand so that the monitor does not topple when you change the monitor’s angle.
You are able to adjust the monitor’s angle up to 20 degrees upward, 5 degrees downward.
In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor’s angle to your own preference.
NOTE Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Careful attention is required not to catch your fingers or hands when you change the angle.
20
5
BEFORE YOU OPERATE THE MONITOR 11
