CONNECTING YOUR MONITOR
A
B
*C
D
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable. (See page 24 for CONNECTOR PIN ASSIGNMENT.)
Connect the monitor to the audio equipment with the Audio Cable when using the audio features. Connect the Power Cable to the monitor first and then to the power supply.
NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.
Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
*Available for ProLite E383S only
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
