Iiyama H2130, H1900, H2010 user manual Connecting Your Monitor

CONNECTING YOUR MONITOR ProLite H2130

AEnsure that both the computer and the monitor are switched off.

BConnect the computer to the monitor with the signal cable. (See page 31 for CONNECTOR PIN ASSIGNMENT.)

CConnect the monitor to the USB compliant computer with the USB Cable when using the USB hub features.

DConnect the monitor to the audio equipment with the Audio Cable for computer when using the audio features.

EConnect the Power Cable to the monitor first and then to the power supply.

NOTE n The signal cables used for connecting the computer and monitor vary by the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer.

n For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.

n Make sure you tighten the finger screws at each end of the signal cable.

n In case your computer is not compatible with USB2.0, the USB hub is compatible with USB1.1.

n Cables are connected easily by rotating the panel 90 degrees. (See page 12 for PANEL ROTATION.)

n Cables can be bundled together inside the cover at the back of the stand. See page 11 for cable wiring.

[Example of Connection]

< Back >

ENGLISH

Keyboard

Mouse

	Printer
	USB Cable SU43 (Accessory)
	Audio Cable AD25 (Accessory)
Computer
To DVI connector of	DVI-D Signal Cable DV67/DV68 (Accessory)
computer
	or
To D-SUB connector
	DVI-A Signal Cable DV62/DV63 (Accessory)
of computer

Power Cable (Accessory)

Video Adapter OVA3-1 (Optional)

D-SUB Signal Cable (Not included)

Additional Display Monitor

BEFORE YOU OPERATE THE MONITOR 9