OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS.
( Press the Menu Button to start the On Screen Display feature. There are additional Menu pages which can be switched by using the +/– Buttons.
Displayed while sRGB is active.
Displayed while Economy Mode is active.
1
Adjustment icon 
Current horizontal frequency, vertical refresh rate 
and resolution
Displayed while Lockout is active.
Displayed while Mute is active.
sRGB LOCK | M e n u : 1 | Page no. |
1600 × 1200
H: 74.35 KHz V: 59.48 Hz
ENGLISH
BSelect the Menu page which contains the adjustment icon relating to the adjustment you want to make. Press the Menu Button again. Then, use the +/– Buttons to highlight the desired adjustment icon. Press the Menu Button again.
CUse the +/– Buttons to make the appropriate adjustment or setting.
For example, to correct for vertical position, select Menu page number 1 and then press the Menu
Button. Then, select 
M e n u : 1
V-Position
An adjustment scale appears after you press the Menu Button. Use the +/– Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this.
The bar shows the progress of the
adjustment being made.
NOTE |
V - P o s i t i o n
–
+
The On Screen Display disappears several seconds after you stop pressing the buttons while performing an adjustment. The Exit Button can be used to exit OSD window immediately.
Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu.
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings.
OPERATING THE MONITOR 11
