Ikelite 6182.14

Substrobe

DS125

EV Controller

Ball Socket

Arm

l A

e D

5 P

e ##33994444..7777

The Substrobe DS125 package

includes the Substrobe DS125, the EV

Controller, ball socket arm and

charger. The EV Controller provides

10 manual power settings in 1/2 stop

increments. An external strobe offers

several advantages over using the

camera‘s built-in flash. External

strobes move the flash away from

the camera lens which helps reduce

backscatter. They also expand

lighting options to achieve the best

lighting for different subjects. A

second external digital strobe

package can be added to fill the

shadows and produce more

realistic photographs.

The Substrobe DS125 covers the

equivalent of a 18mm lens, 100

degrees. It is the ideal choice when

using accessory wide angle lenses

greater than 28mm.

Optional Tray and

Release Handle

required to mount

Substrobes.

The Ikelite Digital Housing should be given the same care and

attention as your other photographic equipment. In addition to

normal maintenance we recommend that the housing be returned

to Ikelite periodically to be checked and pressure tested.

1. D

o N

tleave the camera and housing in direct sunlight for

prolonged periods. Heat may damage the camera.

2. D

o N

tship the camera in the housing.

3. Before using the housing, always check the tightness of the s

win each control knob.

Check each c

l g

dpenetrating the housing to make sure

they are tight. There is a slight chance that either could vibrate

loose during travel.

4. Keep the back o‘ring clean and lightly lubricated. To lubricate

remove the o‘ring from the back. Put a small amount of lkelite

lubricant on your fingers. Draw the o‘ring through your fingers

to apply a light coating of lubricant. Only apply enough

lubricant to make the o‘ring feel slick. D

o N

t s

h t

e o

o‘

‘r

This light coating of lubricant will help to keep the o‘ring from

drying out and will help to show a dark sealing line when the

housing back is properly sealed.

5. Keep the area where the o‘ring fits and the sealing surface of

the housing clean.

6. Rinse the housing exterior thoroughly in fresh water after each

salt water use. Dry with a soft cloth. Dry lens port to eliminate

water spotting.

After several uses in salt water soak the housing exterior in a

mild soap solution, rinse and dry before storage. When storing

the housing, remove the back o‘ring, lightly lubricate and place

in a plastic bag. Place the plastic bag with o‘ring inside the

housing for safe keeping.

r u

e s

y l

s a

s t

e p

t i

t c

e t

e p

c h

g t

o c

Substrobe

DS51

EV Controller

Ball Socket

Arm

l A

e D

1 P

e ##33994444..5544

The Substrobe DS51 package includes

the Substrobe DS51, the EV

Controller and ball socket arms. The

EV Controller provides 10 manual

power settings in 1/2 stop

increments. An external strobe

offers several advantages over using

the camera‘s built-in flash. External

strobes move the flash away from

the camera lens which helps reduce

backscatter. They also expand

lighting options to achieve the best

lighting for different subjects. A

second external digital strobe

package can be added to fill the

shadows and produce more realistic

photographs.

The Substrobe DS51 covers the

equivalent of a 28mm lens. It is the

ideal choice when using only the

camera lens or the camera lens with

a macro accessory lens.

If an accessory wide angle lens wider

than 28mm is used, the ideal

lighting choice is the Substrobe

DS125, which covers 100 degrees, or

two Substrobe DS51‘s can be used.

Optional Tray and

Release Handle

required to mount

Substrobes.