4-20

Section 4 - Lubrication & Maintenance

Every 50 Hours

NOTE: Wash the filter more frequently when operating in extremely dusty conditions.

NOTE: Replace the filter when holes or tears are visible.

NOTE: The element may be washed a maximum of 10 times.

Reinstall the filter into its frame.. Lift the assembly in to place and lock in position using the knob (2)..

WARNING: The cab air filter is designed to remove dust from the air but will not exclude chemical vapor. Follow the chemical manufacturers directions regarding protection from dangerous chemicals.

Operation 20

Check the Differential Oil Level

Differential oil level must be maintained to provide adequate lubrication and cooling to the differential

components..5

Check the differential oil level in both axles when the tractor is on a level surface and has been stationary

for one hour to allow the oil in each of the axles and planetary hubs to level out..

Each axle housing has a convenient sight gauge (5) located on the right half of the axle when facing the differential input.. The oil level in the gauge should

be even with the center of plug (6).. If additional differential oil is required, remove the plug (6) and add oil as necessary..

Torque Value: 61-75 N·m (45-55 ft-lbs)

Wrench size: 1¼" (1..250")

Buhler Versatile recommends 85W140 GL5 oil be used in temperatures above or 80W90 GL5 in temperatures below 0°C (32°F)..

6

F4-27

435/485/535